WE INTRODUCE MINI; AN EXTREMELY COMPACT AND COMPETITIVE PACKAGING MACHINE.

Since the introduction of the MP125 in 2009, which was succeeded by the MP150 in 2012, these small VFFS machines have been a great success for GKS Packaging. The MP125 was the first vertical form fill and seal machine with a machine volume of less than one cubic meter and has been successfully installed in countless applications worldwide.

In 2014 GKS introduced the unique fully modular construction method of its CP and UP packaging machine series. All well-known and proven advantages of this innovative modularity are now implemented into MINI, the successor to the MP150.

With MINI, GKS once again offers an extremely compact and competitive packaging machine, built according its inventive simplicity and characterized by a ‘frameless design’.

Despite its small dimensions, MINI is a ‘mature’ machine with a capacity of up to 65 packs per minute and a maximum bag width of 160mm.

MINI is equipped as standard with a heat sealing system for PP/laminate/paper-material, lateral film adjustment, a 7” full color touchscreen, end of film detection and servo controlled film transport.

The design of this ‘frameless’ machine also takes into account the CO2 footprint and the environment. For example the side frames are made entirely of recycled ocean plastic.

Like all other GKS machines, MINI can be equipped with many options. Such as a sealing system for PE film, MAP packing, easy opening with pouring opening, block bottom mechanism, photocell for pre-printed film and thermal transfer printer.

Also several types of dosing systems can be placed above MINI, such as a weigher, pump or auger filler. Due to its low construction height, MINI is also very suitable for manual filling.

Applications for MINI are numerous, such as packing small portions of dressing and sauces, cheese, croutons or nuts.

The first MINI’s have recently been installed and the first production series are now rolling off the factory floor.

Check out MINI!

WE INTRODUCE MINI; AN EXTREMELY COMPACT AND COMPETITIVE PACKAGING MACHINE.

Since the introduction of the MP125 in 2009, which was succeeded by the MP150 in 2012, these small VFFS machines have been a great success for GKS Packaging. The MP125 was the first vertical form fill and seal machine with a machine volume of less than one cubic meter and has been successfully installed in countless applications worldwide.

In 2014 GKS introduced the unique fully modular construction method of its CP and UP packaging machine series. All well-known and proven advantages of this innovative modularity are now implemented into MINI, the successor to the MP150.

With MINI, GKS once again offers an extremely compact and competitive packaging machine, built according its inventive simplicity and characterized by a ‘frameless design’.

Despite its small dimensions, MINI is a ‘mature’ machine with a capacity of up to 65 packs per minute and a maximum bag width of 160mm.

MINI is equipped as standard with a heat sealing system for PP/laminate/paper-material, lateral film adjustment, a 7” full color touchscreen, end of film detection and servo controlled film transport.

The design of this ‘frameless’ machine also takes into account the CO2 footprint and the environment. For example the side frames are made entirely of recycled ocean plastic.

Like all other GKS machines, MINI can be equipped with many options. Such as a sealing system for PE film, MAP packing, easy opening with pouring opening, block bottom mechanism, photocell for pre-printed film and thermal transfer printer.

Also several types of dosing systems can be placed above MINI, such as a weigher, pump or auger filler. Due to its low construction height, MINI is also very suitable for manual filling.

Applications for MINI are numerous, such as packing small portions of dressing and sauces, cheese, croutons or nuts.

The first MINI’s have recently been installed and the first production series are now rolling off the factory floor.

Check out MINI!

WE INTRODUCE MINI; AN EXTREMELY COMPACT AND COMPETITIVE PACKAGING MACHINE.

Since the introduction of the MP125 in 2009, which was succeeded by the MP150 in 2012, these small VFFS machines have been a great success for GKS Packaging. The MP125 was the first vertical form fill and seal machine with a machine volume of less than one cubic meter and has been successfully installed in countless applications worldwide.

In 2014 GKS introduced the unique fully modular construction method of its CP and UP packaging machine series. All well-known and proven advantages of this innovative modularity are now implemented into MINI, the successor to the MP150.

With MINI, GKS once again offers an extremely compact and competitive packaging machine, built according its inventive simplicity and characterized by a ‘frameless design’.

Despite its small dimensions, MINI is a ‘mature’ machine with a capacity of up to 65 packs per minute and a maximum bag width of 160mm.

MINI is equipped as standard with a heat sealing system for PP/laminate/paper-material, lateral film adjustment, a 7” full color touchscreen, end of film detection and servo controlled film transport.

The design of this ‘frameless’ machine also takes into account the CO2 footprint and the environment. For example the side frames are made entirely of recycled ocean plastic.

Like all other GKS machines, MINI can be equipped with many options. Such as a sealing system for PE film, MAP packing, easy opening with pouring opening, block bottom mechanism, photocell for pre-printed film and thermal transfer printer.

Also several types of dosing systems can be placed above MINI, such as a weigher, pump or auger filler. Due to its low construction height, MINI is also very suitable for manual filling.

Applications for MINI are numerous, such as packing small portions of dressing and sauces, cheese, croutons or nuts.

The first MINI’s have recently been installed and the first production series are now rolling off the factory floor.

Check out MINI!

News

All

All
Jobs
News
Product information

MINI

Big things come in small packages

18 February 2021

WE INTRODUCE MINI; AN EXTREMELY COMPACT AND COMPETITIVE PACKAGING MACHINE. Since the introduction of the MP125 in 2009, which was...

Fruit Logistica Exhibitor GKS Packaging Kronen GmbH

A platform for new ideas and new solutions

10 July 2020

You are invited to visit us in February on our booth, together with our partner Kronen GmbH. We are happy...

GKS Packaging Multivac

GKS Packaging joins the MULTIVAC Technology Network

11 June 2020

Successful together MULTIVAC, one of the leading suppliers of integrated packaging solutions, and GKS Packaging, manufacturer of vertical form fill...

20-22 October; Fruit Attraction Madrid. Here you can get acquainted with our newest machine LEAF.

24 March 2020

Earlier, in January of this year, we showed our LEAF at Fruit Logistica in Berlin. Now we present the machine...

25 Feb to 3 March 2021 Messe Düsseldorf Germany @ Hall 5 / C03

24 March 2020

Interpack is far more than just a packaging show. As the world's leading trade fair, it is the major inspiration...

LEAF

LEAF & GKS Packaging on Biofach

3 February 2020

On the Biofach 2020, GKS Packaging introduces LEAF, a new packaging machine for use with paper. LEAF is the first...

LEAF

We at GKS Packaging “be-LEAF” in paper

28 January 2020

On the Fruitlogistica 2020, GKS Packaging introduces LEAF, a new packaging machine for use with paper. LEAF is the first...

Finnvacum LUT GKS Packaging

Finnish university conducts research with flexible machine from GKS Packaging

24 January 2020

The Technical University of Lappeenranta (LUT) in Finland recently bought a GKS-Compack CP350 Plus vertical form fill and seal machine...

SERVICEMONTEURS OPGELET! KOM JIJ ONZE KLANTEN HELPEN?

9 January 2020

Ben jij die servicemonteur op zoek naar een nieuwe werkomgeving waar passie en plezier centraal staan? Zoek dan niet verder...

GKS-TOP-MIT-Samenwerking

Innovation project is great success

9 October 2019

The objective of this R&D collaboration project was to develop, build and test a prototype of an aseptic robot filler...

We’re always happy to advise you or help you find the most efficient and affordable solution to your packaging challenges. Get in touch today – without obligations – to ask any questions you may have!